I have a WordPress site where I created a static page for each article. In the menu, you can see subjects such as “Music”, “Traveling”, “Football”, and by following the menu you can find links to each article (one static page per article).

When I type my name in Google, I notice my website is showing amongst the top results. However, I cannot find any of my pages/articles back in Google.

Example: I have written about several soccer/football games I visited, the names of the teams involved are part of the URL of those pages.
Still, when I type the name of a team I wrote about in Google, my article isn’t showing in the search results.

Is there anything I could do to increase my chances of Google showing my articles in the results? Can I point my site to Google so that it indexes the whole website?

One thing I was wondering… I could replace all static pages by blog posts, and then in the menu list all articles per subject with hyperlinks to the corresponding blog posts. In other words, one blog post per article instead of one page per article. This would be a lot of work, but the one reason I was thinking about this is that in blog posts you can add tags for search engines to find your articles/posts easily.
Would it make a difference for me to do this, or is there a way for my static pages to show in search engine results too?

Both me and the current owner of a domain I want have agreed to a purchase price to buy the domain. We need a trustworthy escrow service.

However, the seller is not sure how to actually do the transferring of the domain (ie so that I as the buyer am the only one who can ever access the domain going forward). Any advice? Thank you!

What do you guys feel is the best affordable hosting company? In other words, what's the best bang for your buck?

I am a bit lost here and I need some help. As I am trying to register a domain for email.

When I get a different domain registrar and web host (which both have a free email included) which one do I pick? And can I switch after I already registered an email address at one of the two?

Again, I’m lost and I hope someone can help me!

Also, is it complicated to change the DNS to the host (it seems to me like I need to do that if I have two different providers)?

Thanks!

Congratulations! 🎊 👏
A lot of big forums on that list.

About a month ago the web hosting company that we dealt with was recently purchased by an EIG (Endurance International Group) company. I didn't initially know they were an EIG company and it didn't matter as we didn't have any say in the acquisition anyway.

There was a lot of errors on their side, when they migrated everything over to their servers. Things like emails of our clients suddenly stopped working. Invoices sent out to our clients who had long since closed their accounts. Domain records taking ages to repropagate once transferred, etc. Also the domain records that were transferred had invalid DNS records added to the list.

The communication to us, from this company, has been poor. Even though they announced the migration date to us, only 3 days before the deadline, they didn't respond to any of our questions about how we might be affected. After the 3 days when they migrated everyone over night most of our clients became inaccessible by email.

Has anyone else had this problem and I am wondering how you resolved it?

yes. However, Cloudflare lets you use an origin certificate, which consists of a certificate and a private key that is valid for up to 15 years, and is only going to be trusted by Cloudflare itself. Read their docs.

You most definitely want to keep all traffic encrypted in transit between your origin services and the Cloudflare network.

if you sell products you must still have a certificate, cloudflare only encrypts part of the request, so its only really good if you want to show ppl theres https

@cloudmate said:
Heard that for the first time ever!
Literally, so many providers being accused of breaking privacy

Sad that the hosting industry is so intertwined with politics that they can't treat all sides fairly.

Hosting a Website in Oracle Cloud Free Tier

• by author "Your Sunny" found here:
  https://yoursunny.com/
  ---------------------------------------‐-----------------
  Oracle Cloud is a cloud computing service offered by Oracle Corporation.
  Oracle Cloud has a generous free tier that offers two "always free" Micro instances with the following specification:

KVM virtualization
1/8 CPU cores (AMD EPYC 7551)
1GB memory
47GB disk storage
1 IPv4 address
up to 32 IPv6 addresses
50Mbps Internet bandwidth
I signed up for Oracle Cloud, so that I can have some more free computing resources to play with.

The sign-up procedure requires a credit card for identity confirmation purpose, but the credit card will not be charged.
During sign-up, there's a choice of home region, which determines the location of VM instances; once selected, it cannot be changed in the future.

A common use case for a virtual machine is to host a website.
Due to the firewalls, hosting a website on Oracle Cloud needs a few more steps.
Here's exactly how to deploy a website in a Oracle Cloud Free Tier VM instance.

UPDATED 2022-01-27:
Oracle Cloud now supports IPv6.
Instructions are updated to enable IPv6 on the web server.

Create a VM Instance
Each Oracle Cloud account is eligible for two Always Free Micro instances.
To create a VM, sign in to the Oracle Cloud console, in "Launch Resources" section click Create a VM instance.
This takes us to the "Create Compute Instance" page.

In "Image and shape" section, select VM.Standard.E2.1.Micro shape and Canonical Ubuntu 20.04 image.
Do not use the "Canonical Ubuntu 20.04 Minimal" image.

Create Compute Instance - Image and shape

In "Configure network" section, select Create new virtual cloud network, and keep other options at their default values.

In "Add SSH keys" section, select Paste public keys, and paste your SSH public key in the text box below.
If you do not have a SSH public key, follow this guide to generate one.

Finally, click the Create button to create the compute VM instance.
Within a few seconds, you should see the "Instance Details" page.

Instance Details

You can SSH into the VM instance using the public IP address and username displayed in the "Instance Access" section.

LowEndSpirit
HOME › TECHNICAL
Search
How to Host a Website in Oracle Cloud Free Tier

Oracle Cloud is a cloud computing service offered by Oracle Corporation.
Oracle Cloud has a generous free tier that offers two "always free" Micro instances with the following specification:

KVM virtualization
1/8 CPU cores (AMD EPYC 7551)
1GB memory
47GB disk storage
1 IPv4 address
up to 32 IPv6 addresses
50Mbps Internet bandwidth
I signed up for Oracle Cloud, so that I can have some more free computing resources to play with.
The sign-up procedure requires a credit card for identity confirmation purpose, but the credit card will not be charged.
During sign-up, there's a choice of home region, which determines the location of VM instances; once selected, it cannot be changed in the future.

A common use case for a virtual machine is to host a website.
Due to the firewalls, hosting a website on Oracle Cloud needs a few more steps.
Here's exactly how to deploy a website in a Oracle Cloud Free Tier VM instance.

UPDATED 2022-01-27:
Oracle Cloud now supports IPv6.
Instructions are updated to enable IPv6 on the web server.

Create a VM Instance
Each Oracle Cloud account is eligible for two Always Free Micro instances.
To create a VM, sign in to the Oracle Cloud console, in "Launch Resources" section click Create a VM instance.
This takes us to the "Create Compute Instance" page.

In "Image and shape" section, select VM.Standard.E2.1.Micro shape and Canonical Ubuntu 20.04 image.
Do not use the "Canonical Ubuntu 20.04 Minimal" image.

Create Compute Instance - Image and shape

In "Configure network" section, select Create new virtual cloud network, and keep other options at their default values.

In "Add SSH keys" section, select Paste public keys, and paste your SSH public key in the text box below.
If you do not have a SSH public key, follow this guide to generate one.

Finally, click the Create button to create the compute VM instance.
Within a few seconds, you should see the "Instance Details" page.

Instance Details

You can SSH into the VM instance using the public IP address and username displayed in the "Instance Access" section.

Enable IPv6
In this year, it is important for websites to support IPv6.
Today, most cellular networks are IPv6 only.
By enabling IPv6, it enables mobile users to access your website more efficiently, because their sessions do not need to go through IPv4 address translation proxies.

Oracle Cloud compute VM instances are initially assigned with only an IPv4 address.
There are 5 steps for enabling IPv6 on the VM:

Assign IPv6 CIDR block to the Virtual Cloud Network.
Assign IPv6 CIDR block to the Subnet.
Configure IPv6 Route Rule.
Assign IPv6 Address to the compute VM's VNIC.
Configure firewall rules.
We will perform steps 1~4 now, and do step 5 a little later (in "Configure Ingress and Egress Rules" section).

Looking at the "Instance Details" page, click the link next to "Virtual cloud network".
This takes us to the "Virtual Cloud Network Details" page.

Select "CIDR Blocks" tab on the left side "Resources" menu, and then click Add IPv6 CIDR Block button.
You will be asked to confirm that you want to enable IPv6.
When you click Confirm, a /56 block of 4,722,366,482,869,645,213,696 IPv6 addresses are automatically allocated to your Virtual Cloud Network (IPv6 step 1).

CIDR Blocks

Select "Subnets" tab on the left side "Resources" menu.
You should see an existing Subnet.
It would have an IPv4 CIDR Block, but the "IPv6 CIDR Block" column is blank.
Click the ⋮ button in the rightmost column, and select "Edit" in the dropdown menu.
Then, check Enable IPv6 CIDR Block box, enter two hexadecimal digits (such as 00) in the box just before "::/64", and click Save Changes (IPv6 step 2).

IPv6 CIDR Block

Select "Route Tables" tab on the left side "Resources" menu, and then click Default Route Table link.
This takes us to the "Route Table Details" pages.
In the "Route Rules" tables, we can see that there's a route rule for destination 0.0.0.0/0 that targets the Internet gateway, which allows IPv4 packets to reach the Internet.
We need a similar route rule for IPv6.
Click Add Route Rules button.
In the popup dialog, enter the following:

Protocol Version: IPv6
Target Type: Internet Gateway
Destination CIDR Block: ::/0
Target Internet Gateway: Internet gateway vcn-…
Then click Add Route Rules button (IPv6 step 3).

Finally, go back to the "Instance Details" page of the compute VM instance.
To find that page, you can type "Instances" into the search bar and select "Services - Instances (Compute)" in the results.

Select "Attached VNICs" tab on the left side "Resources" menu, and then click the link next to (Primary VNIC).
This opens the "VNIC Details".
Select "IPv6 Addresses" tab on the left side "Resources" menu, and click Assign IPv6 Address button.
In the popup dialog, click Assign button to get a random IPv6 address (IPv6 step 4).

DNS
Now that we have the IP addresses assigned, it is a good time to add DNS records to our compute VM instance, so that we can activate HTTPS later.
Two DNS records are required: an A record for the public IPv4 address and an AAAA record for the public IPv6 address.
You can find both addresses in the "VNIC Details" page, as described above.

DNS record

Configure Ingress and Egress Rules
Oracle Cloud has a strict firewall that, by default, only allows SSH access.
In order to host a website, it is necessary to configure the firewall so that it allows HTTP traffic.

To access the firewall configuration page, click the "subnet" name in "Primary VNIC" section of "Instance Details" page.
Then, on "Subnet Details" page, click "Default Security List for …" in "Security Lists" section.
Click Add Ingress Rules button, and enter these four rules in the popup dialog:

Allow HTTP/1.1 and HTTP/2 (IPv4)

stateless: no
source CIDR: 0.0.0.0/0
IP protocol: TCP
destination port range: 80,443
Allow HTTP/1.1 and HTTP/2 (IPv6)

stateless: no
source CIDR: ::/0
IP protocol: TCP
destination port range: 80,443
Allow HTTP/3 (IPv4)

stateless: no
source CIDR: 0.0.0.0/0
IP protocol: UDP
destination port range: 443
Allow HTTP/3 (IPv6)

stateless: no
source CIDR: ::/0
IP protocol: UDP
destination port range: 443
After that, you should see the following ingress rules in the table:

Virtual Cloud Networks - Ingress Rules

You should also add an IPv6 egress rule, so that the VM instance can reach Internet resources over IPv6.
To do that, select "Egress Rules" tab on the left side "Resources" menu.
Click Add Egress Rules button, and enter the following rule in the popup dialog (IPv6 step 5):

Allow IPv6 Internet access
stateless: no
destination CIDR: ::/0
IP protocol: All Protocols

Install HTTP Server
With the firewall rules in place, we are ready to install an HTTP server.
In this guide, I'm installing Caddy HTTP server along with PHP-FPM.
They can be installed from Caddy package repository and ondrej/php PPA respectively.

see "Caddy package repository" link above for how to add Caddy APT repository

sudo add-apt-repository ppa:ondrej/php
sudo apt install caddy php8.1-fpm
Before we can start the HTTP server, there's one more firewall to configure: the local iptables.
Oracle Cloud not only has an external firewall at subnet level, but also blocks traffic in iptables INPUT chain.
We can setup a systemd service to insert iptables rules before Caddy starts:

sudoedit /etc/systemd/system/caddy-iptables.service
(paste the caddy-iptables.service content)

sudo systemctl daemon-reload
sudo systemctl enable --now caddy-iptables
The systemd unit file caddy-iptables.service should have the following content:

[Unit]
Description=Firewall rules for Caddy
Before=caddy.service

[Service]
ExecStartPre=+/usr/sbin/iptables -I INPUT -p tcp --dport 80 -j ACCEPT
ExecStartPre=+/usr/sbin/iptables -I INPUT -p tcp --dport 443 -j ACCEPT
ExecStartPre=+/usr/sbin/iptables -I INPUT -p udp --dport 443 -j ACCEPT
ExecStartPre=+/usr/sbin/ip6tables -I INPUT -p tcp --dport 80 -j ACCEPT
ExecStartPre=+/usr/sbin/ip6tables -I INPUT -p tcp --dport 443 -j ACCEPT
ExecStartPre=+/usr/sbin/ip6tables -I INPUT -p udp --dport 443 -j ACCEPT
ExecStart=true
RemainAfterExit=yes
ExecStopPost=+/usr/sbin/iptables -D INPUT -p tcp --dport 80 -j ACCEPT
ExecStopPost=+/usr/sbin/iptables -D INPUT -p tcp --dport 443 -j ACCEPT
ExecStopPost=+/usr/sbin/iptables -D INPUT -p udp --dport 443 -j ACCEPT
ExecStopPost=+/usr/sbin/ip6tables -D INPUT -p tcp --dport 80 -j ACCEPT
ExecStopPost=+/usr/sbin/ip6tables -D INPUT -p tcp --dport 443 -j ACCEPT
ExecStopPost=+/usr/sbin/ip6tables -D INPUT -p udp --dport 443 -j ACCEPT

[Install]
RequiredBy=caddy.service
Upload your website content, and make sure the www-data group can access them.
In this example, I'll create two simple files:

sudo mkdir -p /var/www/html
echo '

hello

' | sudo tee /var/www/html/index.html
echo '<?php phpinfo(); ?>' | sudo tee /var/www/html/phpinfo.php
sudo chgrp -R www-data /var/www/html
Edit the Caddyfile (/etc/caddy/Caddyfile), paste the following:
(change the domain name and root directory as appropriate)

{
servers {
protocol {
experimental_http3
}
}
}

https://demo.example.com {
root * /var/www/html
file_server
php_fastcgi unix//run/php/php8.1-fpm.sock

header {
Strict-Transport-Security max-age=2592000
X-Frame-Options SAMEORIGIN
X-Content-Type-Options nosniff
Referrer-Policy no-referrer-when-downgrade
}
}
Finally, restart the webserver for the settings to take effect:

sudo systemctl restart caddy
sudo systemctl restart php8.1-fpm

Test the Website
To confirm everything is working, we can visit the index page https://demo.example.com/ and the PHP script https://demo.example.com/phpinfo.php in the browser.

Then, we use the curl command line tool (on a different machine) to check that:

HTTP-to-HTTPS redirect is working properly.
The website is served over HTTP/1.0, HTTP/1.1, HTTP/2, and HTTP/3.
The server is accessible over both IPv4 and IPv6.
$ curl -4 --http1.0 -I http://demo.example.com/
HTTP/1.0 308 Permanent Redirect
Connection: close
Location: https://demo.example.com/
Server: Caddy
Date: Fri, 28 Jan 2022 02:16:43 GMT

$ curl -6 --http1.0 -I http://demo.example.com/
HTTP/1.0 308 Permanent Redirect
Connection: close
Location: https://demo.example.com/
Server: Caddy
Date: Fri, 28 Jan 2022 02:16:43 GMT

$ curl -4 --http1.1 -I http://demo.example.com/
HTTP/1.1 308 Permanent Redirect
Connection: close
Location: https://demo.example.com/
Server: Caddy
Date: Fri, 28 Jan 2022 02:16:44 GMT

$ curl -6 --http1.1 -I http://demo.example.com/
HTTP/1.1 308 Permanent Redirect
Connection: close
Location: https://demo.example.com/
Server: Caddy
Date: Fri, 28 Jan 2022 02:16:44 GMT

$ curl -4 --http1.1 -I https://demo.example.com/
HTTP/1.1 200 OK
Accept-Ranges: bytes
Alt-Svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
Content-Length: 15
Content-Type: text/html; charset=utf-8
Etag: "r6edtff"
Last-Modified: Fri, 28 Jan 2022 02:05:39 GMT
Referrer-Policy: no-referrer-when-downgrade
Server: Caddy
Strict-Transport-Security: max-age=2592000
X-Content-Type-Options: nosniff
X-Frame-Options: SAMEORIGIN
Date: Fri, 28 Jan 2022 02:16:45 GMT

$ curl -6 --http1.1 -I https://demo.example.com/
HTTP/1.1 200 OK
Accept-Ranges: bytes
Alt-Svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
Content-Length: 15
Content-Type: text/html; charset=utf-8
Etag: "r6edtff"
Last-Modified: Fri, 28 Jan 2022 02:05:39 GMT
Referrer-Policy: no-referrer-when-downgrade
Server: Caddy
Strict-Transport-Security: max-age=2592000
X-Content-Type-Options: nosniff
X-Frame-Options: SAMEORIGIN
Date: Fri, 28 Jan 2022 02:16:45 GMT

$ curl -4 --http2 -I https://demo.example.com/
HTTP/2 200
accept-ranges: bytes
alt-svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
content-type: text/html; charset=utf-8
etag: "r6edtff"
last-modified: Fri, 28 Jan 2022 02:05:39 GMT
referrer-policy: no-referrer-when-downgrade
server: Caddy
strict-transport-security: max-age=2592000
x-content-type-options: nosniff
x-frame-options: SAMEORIGIN
content-length: 15
date: Fri, 28 Jan 2022 02:16:46 GMT

$ curl -6 --http2 -I https://demo.example.com/
HTTP/2 200
accept-ranges: bytes
alt-svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
content-type: text/html; charset=utf-8
etag: "r6edtff"
last-modified: Fri, 28 Jan 2022 02:05:39 GMT
referrer-policy: no-referrer-when-downgrade
server: Caddy.

strict-transport-security: max-age=2592000
x-content-type-options: nosniff
x-frame-options: SAMEORIGIN
content-length: 15
date: Fri, 28 Jan 2022 02:16:46 GMT

$ docker run -t --rm --network host ymuski/curl-http3 curl -4 --http3 -I https://demo.example.com/
HTTP/3 200
server: Caddy
alt-svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
x-content-type-options: nosniff
last-modified: Fri, 28 Jan 2022 02:05:39 GMT
content-type: text/html; charset=utf-8
accept-ranges: bytes
content-length: 15
referrer-policy: no-referrer-when-downgrade
strict-transport-security: max-age=2592000
x-frame-options: SAMEORIGIN
etag: "r6edtff"

$ docker run -t --rm --network host ymuski/curl-http3 curl -6 --http3 -I https://demo.example.com/
HTTP/3 200
x-frame-options: SAMEORIGIN
etag: "r6edtff"
accept-ranges: bytes
content-length: 15
server: Caddy
alt-svc: h3=":443"; ma=2592000,h3-29=":443"; ma=2592000
referrer-policy: no-referrer-when-downgrade
strict-transport-security: max-age=2592000
x-content-type-options: nosniff
content-type: text/html; charset=utf-8
last-modified: Fri, 28 Jan 2022 02:05:39 GMT
Finally, we use SSL Server Test to verify that TLS certificates and crypto are configured securely, and use Security Headers to check that HTTP Strict Transport Security is setup correctly.

Conclusion
This article explains how to deploy a website in a VM instance on Oracle Cloud Free Tier.
It involves the following steps:

Create an always free compute VM instance.
Enable IPv6 in the Virtual Cloud Network, subnet, and VM instance.
Add ingress and egress rules in the network Security List.
Install Caddy HTTP server and PHP.
Configure local iptables firewall.
Test the website installation.

---

This post is originally published on yoursunny.com blog, not written by myself:
https://yoursunny.com/t/2020/OracleCloud-website/